ADALM-PLUTO; ADALM-2000; Release History. V0.5 Fix package installer on Windows 32-bit; v0.6 (No need to update from v0.5) Add reference to M2k onto the wizard pages (no functional changes) Force DPInst to install the driver even if the driver that is currently installed is a better match than the new driver; v0.7. If you can help me provide a touch screen driver for this device it will be a big help for me and other having this problem. I'll post my touch screen hardware Id here so you can help me find the driver for this tablet: ACPI VENMSSL&DEV1680 ACPI MSSL1680.MSSL1680. Device Description: KMDF HID Minidriver for Touch I2C Device. Thanks in advance!
PLUTO-2.1 Spatial Light Modulator – Microdisplay Features | |
Display Type: | Reflective LCOS (Phase Only) |
Resolution: | 1920 x 1080 |
Pixel Pitch: | 8.0 µm |
Fill Factor: | 93 % |
Active Area | 15.36 x 8.64 mm (0.7″ Diagonal) |
Addressing | 8 Bit (256 Grey Levels) |
Signal Formats | DVI – HDTV Resolution |
Input Frame Rate | 60 Hz |
PLUTO® (PLUs TOrque) screwdrivers represent a real revolution in the assembly market. Totally designed and manufactured in Europe by KOLVER, PLUTO® tools can reach 442 in/lbs with a repeatability of +/-5% with a unique electronic torque control system. The drivers in PLUTO cost a fraction of those in the ORION, and though they are exceptionally well suited to this application, they are not equivalent. Both speakers share a uniform on-axis and off-axis frequency response from the very lowest frequency up into the low kilohertz range. There are different aspects of the software for the ADALM-PLUTO and ADALM2000: device drivers, which allows your PC to properly set up communication between your PC and the actual device, and application code, like MATLAB, Simulink, GNU Radio, iio-oscilloscope (aka osc), or scopy.
The PLUTO-2.1 Spatial Light Modulator is the all-rounder within our product range. It is the best qualified and diversified SLM platform with many versions optimized for specific requirements, including high reflectivity versions featuring a dielectric mirror for high power applications. The PLUTO hardware is already implemented in different industrial applications.
The PLUTO-2.1 phase only Spatial Light Modulator (SLM) consists of a driver unit with standard digital video interface (HDMI) and a phase only LCOS (Liquid Crystal on Silicon) microdisplay with full HD resolution (1920 x 1080 pixel) and 8 µm pixel pitch leading to an active area diagonal of 0.7' with aspect ratio of 16:9.
The PLUTO-2.1 SLM is a plug & play phase modulator device and can be addressed with phase functions via standard graphics cards as an extended monitor device. The green color channel of the video signal is used for addressing 8 bit gray level patterns. Addressing can be done using the supplied Pattern Generator software or the SLM Slideshow Player software or standard image viewer software. HOLOEYE also provides an SLM Display Software Development Kit (SDK) which provides APIs (Application Programming Interface) for different programming languages.
HOLOEYE offers different display versions that can be driven with the PLUTO-2.1 driver unit. The different panel versions are optimized for the use at different wavelength ranges and different applications. All versions use fast full digital addressing which assures high reliability and a compact driver unit as basically only two voltages need to be generated.
The PLUTO-2.1 driver uses an HDMI interface for addressing phase functions and an USB connection to communicate with the driver (to changing the voltage vs. gray level distribution (gamma control) and dynamic range (voltage across the LC cell) in order to calibrate the SLM for different wavelengths). Besides this the driver features a trigger sync output to synchronize the device with external devices.
PLUTO-2.1 update:
With the PLUTO-2.1 firmware update we enabled a faster pulse addressing frequeny which provides a higher dynamic range for addressing voltages. With an adjusted drive sequence and configurations the phase stability was further improved and with that, the diffraction efficiencies could also be enhanced.
With the higher bandwith we also increased flexibility in terms of configurations. The SLM devices come with different sets of configurations for optimized response times or optimized phase stability.
With an adjusted drive sequence the PLUTO-2.1 driver is even capable of addressing 3 x 8 bit within a frame (180 Hz) and can be used for color field sequential phase operation using a fast display version for the visible range (e.g. the PLUTO-2.1-VIS-014 version).
The PLUTO-2.1 driver also features a dual-core ARM® Cortex™-A9 processor which also includes on-chip memory. This enables the user to program additional functionality which is directly processed on the SLM device (e.g. a slideshow from images which are loaded from USB flash or from internal memory). The dual-core system runs an embedded Linux™ SMP operating system and includes a library which provides full control and supervision of the display and driver board. The PLUTO-2.1 provides access through Serial and Ethernet-over- USB2 (RNDIS) interfaces and can be programmed using standard Ubuntu™ cross compile GCC toolchain.
The standard PLUTO displays show a reflectivity of approx. 65%-95% (dependent on version) and diffraction efficiencies of more than 80%.
Download driver SafeNet Authentication Client and Drivers version 10.0.43, v.1.21.0.5 for Windows 7, Windows 8, Windows 8.1, Windows 10 32-bit (x86), 64-bit (x64). Installation screenshots SafeNet Authentication Client and Drivers File Name. Mac OS X GlobalSign SAC MAC v10.0. MAC OS Catalina. GlobalSign SAC MAC v10.2 Post GA R3. If you are experiencing any of the below issues with the SafeNet Driver, please refer to the workaround section.
PLUTO-2.1 LCOS Spatial Light Modulator Versions
Besides the standard PLUTO-VIS and PLUTO-NIR versions there are special high retardation versions available (-HR versions) which show a considerably higher phase retardation compared to the standard panels, which enables more stable addressing or mod 4π respectively mod 6π phase functions to be addressed. This can be beneficial for wave front functions as this enables higher slopes and can reduce transition points in the addressed function compared to mod 2π encoding.
The pulse code modulation for digitally addressed devices leads to a slight superimposed phase flicker. For some applications a stable phase response is required. This can be accomplished driving the high retardation panels with low voltage settings for 2π phase retardation, however compromising the response time.
Some PLUTO SLM display versions are equipped with a dielectric mirror coating to increase the reflectivity to >90%. Due to the increased reflectivity less absorption occurs and these display versions can be used with higher incident laser power compared to the standard versions.
Version | Wavelength Range | Reflectivity | Max. Phase Shift | Comment | Recommendation |
PLUTO-2.1-UV-099 | 350 – 500 nm | 90 % (80% at 500 nm) | 5.2 Pi @ 355 nm 4.9 Pi @ 405 nm | Dielectric Mirror | UV resistance, Higher Power Use |
PLUTO-2.1-VIS-014 | 420 – 650 nm | 65 % | 4.2 Pi @ 530 3.0 Pi @ 650 nm | Fast Response Time | |
PLUTO-2.1-VIS-016 | 420 – 650 nm | 67 % | 6.9 Pi @ 530 nm 5.2 Pi @ 633 nm | High Retardation Version | Low Phase Flicker |
PLUTO-2.1-VIS-097 | 515 – 650 nm | 94 % (average) | 35 Pi @ 530 nm 2.7 Pi @ 633 nm | Dielectric Mirror | Higher Power Use |
PLUTO-2.1-NIR-011 | 420 – 1100 nm | 65-75 % | 5.3 Pi @ 530 nm 3.1 Pi @ 800 nm 2.3 Pi @ 1064 nm | Broadband Use, Fast Response Time | |
PLUTO-2.1-NIR-015 | 650 – 1100 nm | 65-73 % | 5.4 Pi @ 800 nm 3.6 Pi @ 1064 nm | High Retardation Version | Low Phase Flicker |
PLUTO-2.1-NIR-118 | 730 – 950 nm | 95 % | 3.1 Pi @ 800 nm | Dielectric Mirror, | Higher Power Use |
PLUTO-2.1-NIR-149 | 1000 – 1100 nm | 93 % | 2.9 Pi @ 1064 nm | Dielectric Mirror, | Higher Power Use |
PLUTO-2.1-NIRO-023 | 1000 – 1400 nm | 74 % | 4.2 Pi @ 1300 nm | ||
PLUTO-2.1-TELCO-013 | 1400 – 1700 nm | 80 % | 3.9 Pi @ 1550 nm | ||
PLUTO-2.1-TELCO-059 | 1500 – 1600 nm | 90 % | 3.1 Pi @ 1550 nm | Dielectric Mirror |
- Currently not available
PLUTO-2.1 Spatial Light Modulator Kit – Contents:
PLUTO-2.1 Spatial Light Modulator – Scope of Supply |
PLUTO-2.1 SLM Driver Box |
Phase Only Display incl. Flex Cable (1920 x 1080 Pixel) |
HDMI Cable |
USB Cable |
Power Supply (12V DC) |
Magnetic Display Mount |
Device Mount |
Safety instructions & quick-start guide |
USB flash drive with documentations, detailed manual, Configuration Manager and SLM software |
PLUTO-2.1 Phase Modulator – Software Features:
The PLUTO-2.1 phase only modulator devices can simply be addressed like an external monitor using the standard DVI / HDMI interface of the graphics card. No additional software or dedicated hardware is needed to operate the SLM.
The device is delivered with a Configuration Manager software. The Configuration Manager can be used to change geometrical settings, brightness, contrast and the electrooptical response by applying a new gamma curve or another digital drive scheme. For these advanced calibrations the device uses an USB connection to a virtual COM port of the computer.
Pluto Divergent
In addition a HOLOEYE SLM Pattern Generator software is provided with the SLM:
PLUTO-2.1 update:
With the PLUTO-2.1 firmware update we enabled a faster pulse addressing frequeny which provides a higher dynamic range for addressing voltages. With an adjusted drive sequence and configurations the phase stability was further improved and with that, the diffraction efficiencies could also be enhanced.
With the higher bandwith we also increased flexibility in terms of configurations. The SLM devices come with different sets of configurations for optimized response times or optimized phase stability.
With an adjusted drive sequence the PLUTO-2.1 driver is even capable of addressing 3 x 8 bit within a frame (180 Hz) and can be used for color field sequential phase operation using a fast display version for the visible range (e.g. the PLUTO-2.1-VIS-014 version).
The PLUTO-2.1 driver also features a dual-core ARM® Cortex™-A9 processor which also includes on-chip memory. This enables the user to program additional functionality which is directly processed on the SLM device (e.g. a slideshow from images which are loaded from USB flash or from internal memory). The dual-core system runs an embedded Linux™ SMP operating system and includes a library which provides full control and supervision of the display and driver board. The PLUTO-2.1 provides access through Serial and Ethernet-over- USB2 (RNDIS) interfaces and can be programmed using standard Ubuntu™ cross compile GCC toolchain.
The standard PLUTO displays show a reflectivity of approx. 65%-95% (dependent on version) and diffraction efficiencies of more than 80%.
Download driver SafeNet Authentication Client and Drivers version 10.0.43, v.1.21.0.5 for Windows 7, Windows 8, Windows 8.1, Windows 10 32-bit (x86), 64-bit (x64). Installation screenshots SafeNet Authentication Client and Drivers File Name. Mac OS X GlobalSign SAC MAC v10.0. MAC OS Catalina. GlobalSign SAC MAC v10.2 Post GA R3. If you are experiencing any of the below issues with the SafeNet Driver, please refer to the workaround section.
PLUTO-2.1 LCOS Spatial Light Modulator Versions
Besides the standard PLUTO-VIS and PLUTO-NIR versions there are special high retardation versions available (-HR versions) which show a considerably higher phase retardation compared to the standard panels, which enables more stable addressing or mod 4π respectively mod 6π phase functions to be addressed. This can be beneficial for wave front functions as this enables higher slopes and can reduce transition points in the addressed function compared to mod 2π encoding.
The pulse code modulation for digitally addressed devices leads to a slight superimposed phase flicker. For some applications a stable phase response is required. This can be accomplished driving the high retardation panels with low voltage settings for 2π phase retardation, however compromising the response time.
Some PLUTO SLM display versions are equipped with a dielectric mirror coating to increase the reflectivity to >90%. Due to the increased reflectivity less absorption occurs and these display versions can be used with higher incident laser power compared to the standard versions.
Version | Wavelength Range | Reflectivity | Max. Phase Shift | Comment | Recommendation |
PLUTO-2.1-UV-099 | 350 – 500 nm | 90 % (80% at 500 nm) | 5.2 Pi @ 355 nm 4.9 Pi @ 405 nm | Dielectric Mirror | UV resistance, Higher Power Use |
PLUTO-2.1-VIS-014 | 420 – 650 nm | 65 % | 4.2 Pi @ 530 3.0 Pi @ 650 nm | Fast Response Time | |
PLUTO-2.1-VIS-016 | 420 – 650 nm | 67 % | 6.9 Pi @ 530 nm 5.2 Pi @ 633 nm | High Retardation Version | Low Phase Flicker |
PLUTO-2.1-VIS-097 | 515 – 650 nm | 94 % (average) | 35 Pi @ 530 nm 2.7 Pi @ 633 nm | Dielectric Mirror | Higher Power Use |
PLUTO-2.1-NIR-011 | 420 – 1100 nm | 65-75 % | 5.3 Pi @ 530 nm 3.1 Pi @ 800 nm 2.3 Pi @ 1064 nm | Broadband Use, Fast Response Time | |
PLUTO-2.1-NIR-015 | 650 – 1100 nm | 65-73 % | 5.4 Pi @ 800 nm 3.6 Pi @ 1064 nm | High Retardation Version | Low Phase Flicker |
PLUTO-2.1-NIR-118 | 730 – 950 nm | 95 % | 3.1 Pi @ 800 nm | Dielectric Mirror, | Higher Power Use |
PLUTO-2.1-NIR-149 | 1000 – 1100 nm | 93 % | 2.9 Pi @ 1064 nm | Dielectric Mirror, | Higher Power Use |
PLUTO-2.1-NIRO-023 | 1000 – 1400 nm | 74 % | 4.2 Pi @ 1300 nm | ||
PLUTO-2.1-TELCO-013 | 1400 – 1700 nm | 80 % | 3.9 Pi @ 1550 nm | ||
PLUTO-2.1-TELCO-059 | 1500 – 1600 nm | 90 % | 3.1 Pi @ 1550 nm | Dielectric Mirror |
- Currently not available
PLUTO-2.1 Spatial Light Modulator Kit – Contents:
PLUTO-2.1 Spatial Light Modulator – Scope of Supply |
PLUTO-2.1 SLM Driver Box |
Phase Only Display incl. Flex Cable (1920 x 1080 Pixel) |
HDMI Cable |
USB Cable |
Power Supply (12V DC) |
Magnetic Display Mount |
Device Mount |
Safety instructions & quick-start guide |
USB flash drive with documentations, detailed manual, Configuration Manager and SLM software |
PLUTO-2.1 Phase Modulator – Software Features:
The PLUTO-2.1 phase only modulator devices can simply be addressed like an external monitor using the standard DVI / HDMI interface of the graphics card. No additional software or dedicated hardware is needed to operate the SLM.
The device is delivered with a Configuration Manager software. The Configuration Manager can be used to change geometrical settings, brightness, contrast and the electrooptical response by applying a new gamma curve or another digital drive scheme. For these advanced calibrations the device uses an USB connection to a virtual COM port of the computer.
Pluto Divergent
In addition a HOLOEYE SLM Pattern Generator software is provided with the SLM:
- Computation of computer generated holograms (CGH) from user defined images
- generation of SLM signals representing basic optical functions such as lenses, gratings, axicon and vortex functions
- superposition of CGH's with basic optical functions to combine functionalities
Besides that a special SLM Slideshow Player Software comes with the device. Also an SLM Display SDK is available for download which provides APIs (Application Programming Interface) for different programming languages to show images and data/ phase arrays directly on a HOLOEYE Spatial Light Modulator:
- National Instruments LabVIEW™ 8.6 and later
- MathWorks MATLAB® R2009b and later
- Octave 5.2
- Python™ 2.7 and 3.x
- C or C++ compiler (e. g. Microsoft Visual C++ Compiler)
PLUTO Software Features | |
SLM Configuration Manager | Geometry / Gamma Control |
SLM Pattern Generator | Basic DOE computations; Generation of optical functions (Circular Aperture, Fresnel Zone Lens, Axicon, Single and Double Slit …); Gratings (incl. Blazed and Sinusoidal), superposition of functions (e.g. prisms, Zernike polynomials…) |
SLM Slideshow Player | Plays slideshow of user defined precalculated functions or images |
SLM Display SDK | APIs to show images and data/ phase arrays directly on using LabVIEW, MATLAB®, Octave or Python™ |